NST -GN-6050 Battery 50L 200C Vacuum Dry Oven

Features:

• Radiant warm wall heating system provides optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications.
• 52 L Middle size vacuum chamber.
• 3″ (7.6 cm) glass wool insulation prevents heat loss from working chamber.
• Silicone door gasket and positive latch door maintain seal at all vacuum levels.
• Exclusive polycarbonate safety shield protects door glass.
• Vacuum fittings require .25″ (6.35 mm) I.D. tubing.
• Easy-to-clean #304 stainless steel chamber interior.
• Vacuum and air lines constructed with corrosion-resistant stainless steel tubing for optimum chamber cleanliness and long term performance.
• Two removable stacking aluminum shelves included.
• CE certificated

Chamber and Door

• The chamber is structured with stainless steel and welded to bracing pieces.
• The inner Chamber size: 300 mm x 300 mm x 275 mm (12 x 12 x 11″, 25 Liter)
• A good vacuum sealing is achieved by the silicone gasket and the positive latch door.
• The double layers observation window consists of 1/2″ tempered glass and transparent polycarbonate shield.
• Two stainless steel shelves are included to facilitate processing efficiency.

Temperature Controller

• Single point temperature setting
• Built-in over-temperature protection
• PID precise temperature control
• Temperature control accuracy: +/-0.1°C
• Temperature uniformity: +/-5°C @ 100°C, 25″ Hg at center 6″x6″ area only

Attention

• It’s normal that the SS chamber wall will slightly deform and loose its shine during high-temperature operation. However, this would not affect any functionality.
• Please do not place the sample on the chamber bottom directly.